The procedure of steam cleaning your carpet entails hot water being fed to a spray extraction tool or wand, coupled to a pump vacuum power unit. The cleaning formula is injected under pressure deep in the carpet via water jet nozzles.

The water will then penetrate the fiber all the way down to the backing. This process will loosen any embedded soil, remove oil and grease deposits, and get your carpet cleaner than it has ever been.

There are many sorts and makes of steam carpet cleaners obtainable on the market, ranging from compact portables to the large and extremely powerful truck mounted units. The concept will be the same regardless of what model you choose.

The models that are truck mounted are designed so that only the hose and the wand are taken into the region getting cleaned. These units are very effective, delivering hot water and generating a high vacuum recovery that may be powered by diesel fuel, gas, propane, or even by the motor of the truck.

Most carpet manufacturers, fiber producers, and qualified cleaners endorse this method for achieving soil removal efficiency. Using the present state of art equipment and technology, we’re more than capable of high production and cleaning of carpet.

The real disadvantage to steam carpet cleaning are the problems that are related with over wetting and longer drying times. These could be eliminated however, by a skilled operator who utilizes equipment that’s properly maintained and in good all round operating condition.

At present, you’ll discover two techniques being employed with steam carpet cleaning.

1. This method involves a traffic lane cleaner being sprayed onto the traffic lanes then agitated into the fibers. The whole location is then cleaned by using a hot water extractor that has a cleaning formula being injected into the fibers via the wand.

2. The second method involves a free rinse emulsifying pre-spray being sprayed onto the whole carpet, then agitated into the fibers.

Steam cleaning procedures

1. Prepare the equipment and supplies. In a pump or power sprayer it is best to mix the free rinsing pre-spray. Inside the solution tank of the extractor, mix the rinsing agent.

2. If you have a good deal of furniture to move, make a floor plan.

3. If the area being cleaned has furniture, it is best to take out as much as practical.

4. Adequately vacuum the carpet. In case the pile is matted or crushed, use a pile brush to loosen up the soils which will make vacuuming more effective.

5. Pre-spray a suitable amount of the pre-spray.

6. Utilizing a grooming tool, agitate the pre spray deep into the fibers then allow it to sit for 10 – 15 minutes, making certain that it doesn’t dry out.

7. Extract the location using a portable, truck mounted, or automatic carpet cleaner.

8. Repeat steps 5 through 7 until the whole area has been cleaned.

9. Groom the cleaned region, replace all furniture that was taken out, then clean all equipment which you used.